Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006.

The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process.

The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer.
There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter.
The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover for connecting the cleaning medium - 2 pcs., for vacuum suction and aeration - 1 pc., for attaching a funnel for dosing additives - 1 pc. (with a conical plug), for suction under the mirror - 1 pc. (with a conical plug) and 1 pc. DN 25 spare connector with a conical plug, e.g. for dispensing process water. Additionally, a sight glass with illumination and a DN100 wiper is attached to the front of the cover.
The anchor mixer drive is mounted in the central part of the cover. The paddle mixer with scrapers is driven by an electric motor through a conical-cylinder reducer with a constant ratio. Stepless regulation is carried out via an inverter. In order to improve the mixing process, additional wave breakers were used. There is a funnel on the cover with a capacity of approx. 3 dm3, which allows you to add ingredients to the tank without opening the cover.
The mixer tank is equipped with a heating and cooling jacket.
The mixer is equipped with three temperature sensors.
Elements in contact with the product are made of AISI 316L stainless steel.
The vacuum pump, water installation and elements of the electrical control system are located in the control cabinet.

TECHNICAL CHARACTERISTICS
Type - MZUTL 200F
Working capacity of the tank - 200 liters
Total tank capacity - 330 liters
Material in contact with the product - AISI 316L
Weight of the mixer - approx. 600 kg
Control cabinet weight - approx. 250 kg
Mixer height with CIP - 2080mm
Mixer height with raised cover - ~ 2210mm
Cabinet height - 2140mm
Total length with cabinet - ~ 2160mm
Width with cabinet - 1730mm
Internal diameter of the tank - 0750 mm
Agitator - anchor with PTFE scrapers + breakers
Mixer drive - electric motor with 1.5kW reducer
Mixer speed - steplessly controlled by an inverter in the range from 13 to 64 rpm
Comb-shaped homogenizer - drive power 7.5kW, speed regulated by an inverter in the range of 1500-5000 rpm.
Max, vacuum in the tank - -0.085MPa
Vacuum pump - 1.23.1.10.10
Heating - hot water flow through the jacket + heaters 2x1OkW (20kW)
Cooling with valve regulation - flow through the jacket
Max. temperature, jacket + 91°C
Max. product temperature + 90°C
Temperature stabilization in the tank - Pt100 sensor on the jacket's supply stub
Power supply - 400V+PE+N, required protection 63 A
Water supply
- from the water supply network with a pressure of 0.2 - 0.6 MPa
Air powered
- piped compressed air with a maximum solid particle size of 40pm
- nominal air pressure 0.6MPa
- air supply pressure 0.5-0.7MPa

Sight glass lighting - 24V AC, 20W bulb
Barrier fluid - water from the water supply network as above