automatic blister packer with alternate movement for tablets, dragees, gelules, etc... possibility to make aluminium/aluminium blisters. extra charge to be foreseen. the length with its exit conveyor is 3.90 m

pvc or aluminium film roll holder
thermoforming station for pvc film by flat tooling
manual product distribution station
aluminium film reel support
blister sealing station with flat tooling and embossing station (currently without character)
step length adjustment station
blister cutting station with die cutter
pvc belt conveyor for receiving finished blisters length 600 mm - width 160 mm
pvc belt conveyor length 1800 mm - width 200 mm for blister output with alignment system for lining up and ejection for bad blister (it has no camera for this last function)
control box with programmer and temperature regulators
general drive by motor variator
protective casings

current tooling:
there is 1 new tool which has never been used and which is sold in addition to the tools with this machine. blister 96 x 70 mm of 15 gelules size 0 or 1. price 12.900,00 e.ht
there are several tools for tablets with this machine

capacity:
width pvc max 170 mm - diameter max 400 mm
width of aluminium sheet max 170 mm - max diameter 240 mm
max. feed pitch 108 mm
max. thermoforming depth 10 mm (possibility to go down to 18,5 mm with a production of 35 cycles per minute)

maximum production: 60 cycles/minute (100 to 150 blisters per minute depending on the number of blisters per cycle)

total electrical power: 6 kw
maximum compressed air pressure: 6 to 8 bar

dimension of the exit conveyor:
length 1.85 m - width 0.30 m - height 0.30 m