• Set up for ALU/PVC and ALU/ALU operation for single-cycle (ET) or multi-cycle (MT) operation
• Intermittent plate sealing
• Max. 3-lane, output max. 1,200 blisters/min
• Format range blister (W x L) min 30 x 60 mm / max 120 x 285 mm
• Drawing depth max. 12 mm (PVC), 10 mm (ALU)
• Output max. 60 forming cycles/min, max. 200 punching cycles/min
• Feed length 130-282 mm (ET), 30-120 mm (MT)
• Foil width 150-300 mm
• Punching area in running direction 240 mm, crosswise 285 mm
• Forming film diam. max. 800 mm, core Ø 76 mm (PVC) / 150 mm (ALU),
• Cover foil-diam. max. 400 mm, core-Ø 76 mm
• Cutting and gluing table
• Splice detection forming film
• Web edge control cover foil
• Print image control with cover foil stretching
• Directional feeding (SimTab 2.1) for tablets/capsules with own mobile lift truck
• Non-directional feeding of brush box with own mobile lift truck
• Feed ET after molds and after seals
• Crack and pore monitoring forming film HPF EOK-RS
• Color fill control Scanware LYNX-SPECTRA CL/HR new in 2014
• Foil brake
• Embossing station
• Perforating station
• Feed MT before die cutting
• Waste cutter
• Sliding belt with 3x bad blister ejector
• Suction belt for blister transfer to cartoner
• Side channel blower
• PLC B 2010
• HMI Uhlmann Touchcontrol with IPC Beckhoff C6930 new in 2016
• Ethernet controller Wago 852-112 new in 2016
• Drive 400V/50Hz
• Without format parts