- Maximum blister capacity = 300 per minute
- Minimum speed 15 bar/cycles per minute
- Maximum speed 60 bar/cycles per minute
- Punching area: max. 110 mm in film direction and 180 mm wide
- Width of film passage max 200mm, min 90mm
- Types of moulding film. FF = Moulding foil, DF = Cover film
- Technical documentation and manuals are available with the line
- Several server backups will be available on a USB stick with the line
- The foil and film used on the blister machine is PVC/PVDC or similar
- The pre-printed sheet cannot be used with the machine
- Ink for printing on foil is provided by the supplier (HAPA)
- Data and expiry date on the batch is marked by the HAPA 226 printer
- Format parts will be supplied with the machine, including sealing plates, no drums
- The smallest blister size that worked with the machine was 59/74 and the largest worked 123/48
- The formats included with the line are for the following blister sizes 98 x 39, 59x74, 123x48
- The machine is delivered with the ISR/Packvision control system
- The machine is delivered with a perforation unit
- Rejection of defective blisters is done by flaps
- The changeover time from one format to another is approx. 1.5 to 2.5 minutes

Voltage: 380V /220V
Frequency: 50Hz
Current: 20A
Max Power: VA
Power supply: 3 Phase Neutral and Earth
CE marking : no
Documentation : Mechanical and electrical