- Format range 100 x 153 mm
- Output max 240 blisters/min (depending on product and format)
- Drawing depth max. 12 mm (max. 24 mm after conversion)
- Punching station output max. 60 cycles/min.
- Pre-draw max. 125 mm
- Plate sealing
- Forming film rigid PVC, PVC/PVDC (forming station aluminium optional)
- Film width max. 170 mm
- Film thickness 0.1-0.35 mm
- Sealing film aluminium
- Perforating station
- Batch embossing
- Moulding with air pressure
- Blister transfer with bad ejection
- without format parts
- 380V/50Hz connection
his blister machine has been mechanically overhauled in our specialised workshop. The entire electrical/pneumatic system has been renewed. The machine control system was equipped with the latest control technology.

The following parts were replaced:
- PLC B+R X20 with Automation Panel 12.1" WXGA TFT, system unit PPC3100
- Servo drives, manufacturer B+R
- 1 x film advance after forming and sealing by means of linear servo
- Electrical installation, cabling
- Pneumatics
- Protective panelling
- Various mechanical parts

Optionally available at extra cost:
- Product inspection Scanware
- Brush feeder
- Direct feeding e.g. Uhlmann SimTab / HMH Systems Sypro
- Aluminium forming station
- Further film transport after forming
- Print mark control by means of film stretching station
- Forming tools
- Standard qualification package