max. rotation on guides: 600 mm
max. turning diameter: 550 mm
max. turning length: 1,530 mm
distance between centres: 1,640 mm
max. bar capacity: 116 mm
bar passage: 165 mm
chuck size: 400 mm
type of chuck: kitagawa
table configuration: 45° inclined table
table guideways 45° inclined: square guides
carriage guides: linear guides
x-axis stroke: 254 mm
z-axis stroke: 1,650 mm
x-axis rapid traverse: 12,000 mm/min
Rapid z-axis: 15,000 mm/min
max. rotational speed: 1,650 rpm
x-axis motor power: 4.0 kw
X-axis thrust: 350 kgf
z-axis motor power: 4.0 kw
z-axis thrust force: 350 kgf
continuous spindle motor power: 22 kw
motor power for 30 minutes: 26 kw
spindle nose: a2-11 mm
type of tool turret: hydraulic star
number of tool stations: 10
round tool size: 50 mm
adjacent tool change time: 1 sec
square tool size: 32×32 mm
type of tailstock: manual
max. traverse: 1,456 mm
sleeve stroke: 110 mm hydraulic
sleeve diameter: 110 mm
sleeve cone: mt n°4
sleeve thrust: 400 kgf at 15 kg/cm2
hydraulic power unit capacity: 70 litres
hydraulic motor power: 2.2 kw
hydraulic delivery pressure: min 34/3,4 max 54/5,4 bar/mpa
hydraulic operating pressure: 40/4.0 bar
coolant tank capacity: 200 litres
litres delivered: 35 litres/minute
delivery pressure: 6/6.0 bar/mpa
cooling motor power: 0.75 kw
lubricant tank capacity: 2.0 litres
lubricant delivery: 3-6 cc
delivery pressure: 3.0/0.3 bar/mpa
lubricant motor power: 15 watt
Air pressure: min 6.0/0.6 max 8.0/0.8 bar/mpa
Noise level 80 dba
working door with safety interlock: euchner
working lamp: ac 24 v
power supply via 380 v three-phase transformer 40kwa
total installed power: 46 kwa
dimensions: 4725x1750x2130 mm
weight: 10,500 kg