Output:
up to 30,000 suppositories per hour (aluminium version)
up to 26,000 suppositories per hour (plastic version)
Hopper capacity: 80 litres
Hopper heating: by means of electric resistance and water bath Material roll diameter
standard 490 mm - optional 550 mm
Maximum film width: 65 mm
Packaging materials
Aluminium:
duplex (ALU/PE - ALU/heat-sealed coating) triptex (PP/ALU/PE) - PP/ALU/heat-sealed coating) Aluminium foil thickness: from 70 to 100 microns

Plastic:
PVC, PVCIPE, PVC/ PVDCIPE and other heat-sealable materials.
Plastic film thickness: 100 to 150 microns Temperature control table for temperatures against! in the panel Cooling time: two phases 8 minutes - tour phases 16 minutes Minimum cooling temperature: 3°C
Power of the suppository cooling unit
two stages: 4400 frig./hour with temperature at 3°C
Tour stages: (with one stage heated or at room temperature) 6600 frig./hour - tour stages: 8800 frig./hour

Air consumption:
aluminium version max. 80 NUmin. plastic version max. 120 NL/min. at operating pressure of 5 kg/sq.cm.
Water consumption: 6 to 8 1/min.
optional: closed circuit water with central pumping station of 6000 frig./hr. (two-stage version) and of 11000 frig./hr. (tour-stage version)
Power rating:
Aluminium version: 2 cooling stages 9 kW - 4 cooling stages 12 kW Plastic version: 2 stages 1 or kW - 4 stages 13 kW
Auxiliary input: 24 Vac - 24 Vdc .
Standard input voltage: 220-380 V, three-phase, 50 Hz
other voltages available on request

Length dimensions including heating station spaced from dosing station
dosing station approx. 800 mm
Height of belt from floor to runout: 960 mm
Weight: SMS/15-AP - two stages - 2300 kg
SMS/15-AP - four stages - 2800 kg