Used Novopac CD1 090 2F BM 1409 bundling machine

Solder bar 900 mm
Width max. coil 860 mm
Max product height 400 mm
Inlet tunnel mm 900 x 450 h
Electric frequency Hz 50
Operating Voltage 380 Volt
Absorption Kw 45
Atm 6 min

Wrapping and packaging machine with shrink film of cylindrical, square, rectangular and oval products in various sizes.

The machine is equipped with a self-holding manual stop. The presence of a body under the welding device or overlapping of the introductory group causes the machine to stop automatically in the emergency, this is due to the microswitch. The welder is equipped with a teflon cap and is spring-loaded. The main engine includes a self-braking motor complete with expandable pulley for speed regulation, a gearbox with a pulley and fixed diameter with clutch joint, a chain for transmitting motion from the gearbox to the cam shaft. The batch input in the welding zone is carried out by the drive-up plate driven by a chain driven by a self-braking gear motor. The product from the filling station is oriented and clustered in front of the gripping group. Once the minimum level has been reached, the product may advance and the presence / number of bottles will be checked. Bottles are removed from the media. Binders are introduced into the winding and welding area. After welding, the next burden, pushes the pack onto the conveyor belt of the tunnel. Heat shrinkage takes place in heated and ventilated air at a temperature not exceeding 200 ° C. Inside the room, the heated film retraces around the product, which is then cooled by a fan. Consisting of: conveyor belt conveyor, pneumatic thrust device, welding unit, automatic exhaust tape, heat shrink tunnel. Feed suitable for different carton sizes. Compact design.