5 axis machining centers

132 Machines
5-axis machining centers represent the pinnacle of technical evolution in the world of mechanical engineering, allowing infinite machining operations on parts of various shapes and sizes with absolute precision. At Makinate, you will find a wide selection of high-quality used 5-axis machining centers from the best international manufacturers such as Mazak, DMG Mori, Doosan, Hermle, Emco, Mori Seiki, Kitamura, and many other leading brands in the multi-axis machine tool sector.

Technology and capabilities of 5-axis machining centers

5-axis machining allows for complex operations on components of different shapes and sizes with a level of precision and flexibility that is impossible to achieve with traditional machines.... The term "5-axis" refers to the unique ability of these machines to move the milling tool in five different directions. In addition to the X, Y, and Z axes, common to all milling machines, 5-axis machining centers allow the tool to rotate in a controlled manner around both the A and B axes, offering total freedom of movement and full access to all surfaces of the part.

Rotary axis configuration

The A-axis represents the rotation axis of the head where the tool is mounted, while the B-axis usually represents the rotation axis of the table. This configuration allows the tool to approach the workpiece from any possible direction, enabling machining on five sides of the component with a single machine setup. This results in enormous time savings, eliminating the need to manually reposition the part, and allows the production of finished components with extremely high-precision finishes and very tight tolerances.

Continuous vs indexed 5-axis centers

5-axis machining can be distinguished based on the simultaneity of axis movements. There are two main types of 5-axis machining centers:
  • True 5-axis centers (continuous): all five axes can move simultaneously during machining, allowing the machine to create even very complex geometries during the production cycle
  • Indexed 5-axis centers: the A and B axes are locked in the desired position before the standard 3-axis milling program is executed
In simultaneous 5-axis machining, the operator does not need to manually orient the tool to the desired position, as this is done automatically by the machine through CNC control, ensuring absolute repeatability and consistent precision.

Productivity advantages and applications

5-axis machining centers offer numerous competitive advantages over traditional machines:
  • Complete part machining in a single setup, drastically reducing setup times
  • Elimination of repositioning errors and improved geometric accuracy
  • Capability to produce complex surfaces, undercuts, and 3D geometries impossible with 3-axis machines
  • Reduced overall machining times due to optimal tool access to the workpiece
  • Improved surface finish thanks to optimal tool angles
  • Ideal for sectors such as aerospace, automotive, complex molds, medical equipment, and advanced prototyping

Technical specifications and configurations

The 5-axis machining centers available in our catalog feature various technical configurations. The linear axis travels (X, Y, and Z) typically range from 350-400 mm up to over 2000 mm depending on the model and application. The rotary and tilting tables range from 400 x 400 mm up to 1250 x 800 mm and beyond, with load capacities from 300 kg up to over 1200 kg for the more robust models. Rotary axes typically offer full 360° rotation on the C-axis (table rotation) and variable tilt ranges on the A or B axes (from -110° to +110° or from -120° to +30°, depending on configuration).

High-performance spindles

The spindles installed on 5-axis machining centers are designed for high performance. Common tool holders include HSK 40, HSK 63, ISO 40, ISO 50, and SK-40, with rotation speeds reaching 12,000–15,000 rpm on standard models, up to 18,000–32,000 rpm on high-speed versions for aluminum and light materials. Power ranges from 17 kW up to 35 kW and beyond, ensuring high material removal rates even on difficult materials.

Advanced numerical controls

5-axis machining centers require sophisticated numerical controls capable of managing the complex kinematics of all five axes simultaneously. Main installed controls include Heidenhain (iTNC 530, iTNC 640), Fanuc (16iMB, 18iMB5), Siemens (840D), Mazatrol (Smooth and other versions), and Selca. These advanced CNC systems allow programming of complex toolpaths, kinematic compensation, collision control, and toolpath optimization to maximize production efficiency.5-axis machining centers are typically equipped with automatic tool magazines from 30 to 80 positions or more, laser tool measurement systems for length and diameter, Renishaw probes or equivalent in-machine measurement systems, high-pressure cooling systems (15–50 bar), chip conveyors, spindle cooling systems, coolant filtration and preparation units, and tool breakage monitoring and control systems.

Why choose used 5-axis machining centers on Makinate

Purchasing used 5-axis machining centers is a strategic investment for companies requiring advanced technology for complex machining. Each center in our catalog comes with a complete technical sheet detailing axis type (continuous or indexed), linear and rotary axis travels, table dimensions and load capacity, spindle characteristics, installed numerical control type, tool magazine capacity, installed optional equipment, and general maintenance condition. Used 5-axis machining centers provide access to cutting-edge production technologies at a significantly lower investment compared to new machines, while maintaining the ability to machine complex geometries with maximum precision and top-quality finishes.
mikron-hem-500u-wpc-m2577431311

Used MIKRON HEM 500U WPC 5 axis machining center

  • Code: M2577431311
  • Status: Visible
  • Condition: Good
  • Year: 2014
Technical sheetSend Request
gf-ucp600-vario-m2571418607

Used GF UCP600 VARIO 5 axis machining center

  • Code: M2571418607
  • Status: Visible
  • Condition: Good
Technical sheetSend Request
dmg-hsc-75-linear-m2577663976

Used DMG HSC 75 LINEAR 5 axis machining center

  • Code: M2577663976
  • Status: Visible
  • Condition: Good
  • Year: 2008
Technical sheetSend Request
huron-k2x-8f-m2502405212

Used Huron K2X 8F 5 axis machining center

  • Code: M2502405212
  • Status: Visible
  • Condition: Good
  • Year: 2007
Technical sheetSend Request
hermle-c30u-m2555335825

Used HERMLE C30U 5 axis machining center

  • Code: M2555335825
  • Status: Visible
  • Condition: Good
  • Year: 2007
Technical sheetSend Request
hermle-c-40-u-m2531046984

Used HERMLE C 40 U 5 axis machining center

  • Code: M2531046984
  • Status: Visible
  • Condition: Good
  • Year: 2009
Technical sheetSend Request
doosan-vc-630-5ax-m2519317032

Used DOOSAN VC 630-5AX 5 axis machining center

  • Code: M2519317032
  • Status: Under power
  • Condition: Good
  • Year: 2015
Technical sheetSend Request
cb-ferrari-a16-m2593795037

Used CB FERRARI A16 5 axis machining center

  • Code: M2593795037
  • Status: Visible
  • Condition: Good
  • Year: 2004
Technical sheetSend Request
deckel-maho-dmu-50-m2426502536

Used DECKEL MAHO DMU 50 5 axis machining center

  • Code: M2426502536
  • Status: Visible
  • Condition: Good
  • Year: 2006
Technical sheetSend Request
hermle-c-30-u-m2456713253

Used HERMLE C 30 U 5 axis machining center

  • Code: M2456713253
  • Status: Visible
  • Condition: Good
  • Year: 2014
Technical sheetSend Request
hermle-c-30-u-m2447760756

Used HERMLE C 30 U 5 axis machining center

  • Code: M2447760756
  • Status: Visible
  • Condition: Good
  • Year: 2013
Technical sheetSend Request
deckel-maho-dmu-60-t-m2456519765

Used DECKEL MAHO DMU 60 T 5 axis machining center

  • Code: M2456519765
  • Status: Visible
  • Condition: Good
  • Year: 2003
Technical sheetSend Request
hermle-c-30-u-m2437280242

Used HERMLE C 30 U 5 axis machining center

  • Code: M2437280242
  • Status: Visible
  • Condition: Good
  • Year: 2013
Technical sheetSend Request
deckel-maho-dmu-80-t-m2453144701

Used DECKEL MAHO DMU 80 T 5 axis machining center

  • Code: M2453144701
  • Status: Visible
  • Condition: Good
  • Year: 2002
Technical sheetSend Request
deckel-maho-dmu-80-p-duoblock-m2431844366

Used DECKEL MAHO DMU 80 P duoBLOCK 5 axis machining center

  • Code: M2431844366
  • Status: Visible
  • Condition: Good
  • Year: 2008
Technical sheetSend Request
deckel-maho-dmu-80-P-duoblock-m2456352507

Used DECKEL MAHO DMU 80 P duoBLOCK 5 axis machining center

  • Code: M2456352507
  • Status: Visible
  • Condition: Good
  • Year: 2006
Technical sheetSend Request
deckel-maho-dmu-80-monoblock-m2412121632

Used DECKEL MAHO DMU 80 MONOBLOCK 5 axis machining center

  • Code: M2412121632
  • Status: Visible
  • Condition: Good
  • Year: 2005
Technical sheetSend Request
hermle-c-600-u-m2477144542

Used HERMLE C 600 U 5 axis machining center

  • Code: M2477144542
  • Status: Visible
  • Condition: Good
  • Year: 2001
Technical sheetSend Request
deckel-maho-dmc-75-v-linear-m2457784632

Used DECKEL MAHO DMC 75 V linear 5 axis machining center

  • Code: M2457784632
  • Status: Visible
  • Condition: Good
  • Year: 2007
Technical sheetSend Request
mazak-variaxis-200-m2479623583

Used Mazak Variaxis 200 5 axis machining center

  • Code: M2479623583
  • Status: Visible
  • Condition: Good
  • Year: 2001
Technical sheetSend Request
reform-bautz-compact-mf60-m2426818841

Used REFORM Bautz Compact MF60 5 axis machining center

  • Code: M2426818841
  • Status: Visible
  • Condition: Good
  • Year: 2002
Technical sheetSend Request
hurco-vmx-60-sr-m2470592991

Used HURCO VMX 60 SR 5 axis machining center

  • Code: M2470592991
  • Status: Visible
  • Condition: Good
  • Year: 2013
Technical sheetSend Request
chiron-mill-800-m1600206680

Used CHIRON MILL 800 vertical 5 axis machining center

  • Code: M1600206680
  • Status: Visible
  • Condition: Good
  • Year: 2006
Technical sheetSend Request
mazak-integrex-e-1060-v8-m1600819603

Used Mazak Integrex E 1060 V8 vertical 5 axis machining center

  • Code: M1600819603
  • Status: Visible
  • Condition: Good
  • Year: 2003
Technical sheetSend Request
Brands we deal with
Makino
DECKEL MAHO
Mori Seiki
CHARMILLES
Biglia
Mazak
DOOSAN
DMG MORI
FANUC
+ See all manufacturers
Subscribe now for free to our newsletter!
Subscription was successful. Thank you!
Top Machine tools
Travelling column machining centers
CNC Lathes with live tooling
CNC Lathes with barfeeder
CNC multitasking lathes
CNC Swiss type lathes - sliding headstock lathes
Vertical machining centers
5 axis machining centers
Wire cutting machines
Top Packaging Machines
Horizontal Cartoning machines
Vertical Cartoning machines
Blister machines
Case packers
Counting machines
Filling and Capping monoblock
Capsule filling machines
Complete production and packaging lines
The website uses cookiesCookies do not give the website operator access to the computer and the data collected in this way through cookies does not include personal data (read more).
settings