ELECTRONIC LOAD BALANCER equipped with the following technical features
- gross capacity: 60 Kg
- net capacity: 25 kg
- number of ropes: 1
- vertical axis position control: present
- standard stroke: 2800 mm
- electric joint for continuous rotation of the gripping device: not present
- maximum lifting speed: 36.0 m/min
- supply voltage: 230 V - 50/60 Hz from below
- maximum power consumption: 700 W
- degree of protection: IP 54
ORBIT-ARM" SNODIZED ARM (STD)
- arm length m. 3.00
- maximum rotation 375°
- flange for fixing to support
- clutches on joints adjustable by screws
COLUMN height m. 1.80 for supporting the articulated arm complete with plate for fixing to the floor
EASY HEAD - STANDARD MODEL - for gripping the load, equipped with the following standard components
- Electronic AUTO BALANCING SYSTEM for fast load weight and simple and intuitive TOUCH SCREEN for displaying the manipulator's operating parameters;
- USB-PC CONNECTOR for communication between manipulator and PC;
- PREDISPOSITION for ELECTRICAL and PNEUMATIC ATTACHMENTS for connection with customer tool;
- PREDISPOSITION for MECHANICAL ATTACHMENTS for application of remote handles;
- STOP" BUTTON for stopping the manipulator in "ascent" and "descent";
- FLOAT-MODE" BUTTON for storing the weight of the lifted load, allowing manipulation by acting directly on the load;
- FLOAT-MODE" BUTTON for adding two buttons for possible management of the customer's gripping tool or for the management of "ascent" and "descent";
- SENSITIVE HANDLE to minimise operator effort when lifting the load; Possible simple and rapid handle interchangeability;
- STANDARD HOOK with safety lever;
VERTICAL SENSITIVE HANDLE UNDER HEAD L= mm 125
equipped with a load cell to increase the sensitivity of the handle by about 80% during handling
STANDARD PAINTING GREEN RAL 6018