Batch / min production capacity 30
Material width mm 50-500 mm
Max diam. roll mm 300
Aperture tunnel mm 230 x 560
Box height 12-200 mm
Box width 15-330 mm
Case length 50-300 mm
Bulkhead 30-200 mm
Bulk width 15-300 mm
Lenght length 60-330 mm
Frequency Hz 50
Voltage Volt 380

Shrinking machine for shrinking various products.

The machine is equipped with a self-holding manual stop. The presence of a body under the welding device or overlapping of the introductory group causes the machine to stop automatically in the emergency, this is due to the microswitch. The welder is equipped with a teflon cap and is spring-loaded. The main engine includes a self-braking motor complete with expandable pulley for speed regulation, a gearbox with a pulley and fixed diameter with clutch joint, a chain for transmitting motion from the gearbox to the cam shaft. The batch input in the welding zone is carried out by the drive-up plate driven by a chain driven by a self-braking gear motor.
- Feed conveyor belt
- Induction welding bar
- Suitable for different sizes of cartons
- Compact design
- Complete with heat shrink tunnels mod. M32N with internal circulation fan and cooling fan