Used CAM M92F + PG blister line

This intermittently operating blister packaging machine is designed for the production of deep-drawn and sealed blister strips. The machine operates from left to right and is designed for variable speed operation with a maximum capacity of 40 strokes per minute.
After the blister pack has been filled with vials. At the next station the blister belt passes through a guillotine where the blisters are cut. The blisters are placed on a conveyor and transferred to the cartoning machine.
The deep-drawing foil is extracted from a reel on a separate reel holder to the left and is fed to the heating and deep-drawing station where the blister pockets are formed with the assistance of compressed air.
At the filling station, the product is fed into the formed blister pockets.
This machine is equipped with an automatic product feeding unit where the product is extracted from the magazines (not included) and is then aligned and placed in the pockets.
Technical specifications:

Maximum production: 40
Maximum forward draw: 204 mm
Max. pull-out depth: 28 mm
Sheet width: 256
Maximum roll diameter Deep sheet: 400 mm
Compressed air: 6.0 - 8.0 bar
Air consumption: min. 500 NL/min
Cooling water required: approx. 0.7 m3/hr
Power consumption: 13kW
This blisterpacker is currently equipped with the following formats: 1-2 ml

CARTONING MACHINE:

CAM PG Automatic horizontal intermittent motion cartoner
Cartoning machine for large products.
Capable of mechanical speeds of 15 to 70 cartons per minute.
(Actual speeds depend on the nature of the product).

Carton size range:
A Min 50mm Max 200mm
B Min 25mm Max 120mm
C Min 105mm Max 300mm
A + B Max 290mm

Machine is set up for glue closure
Machine equipped with:GUK LEAFLET FOLDER