Used CAM HF77 horizontal cartoning machine

High-performance cartoner with continuous motion. The formats are fully adjustable. With simple operations and the replacement of a few parts it is possible to use cases with even or alternating flaps, with sizes within the following limits:
Width: 20-70 mm
Height: 12-70 mm
Length: 55-200 mm
Maintenance of the equipment is very simple and above all easy to use.
The cams are of the channel type made from a single block, the mechanical shafts are installed on ball bearings.
Cartoning speed:
HF 77 cartoner from 50 to 250 cartons per minute.
Safety:
The cartoner is equipped with electrical and mechanical safety devices, which intervene in case of malfunctions, interrupting the regular working cycle, thus eliminating the risk of breakage or damage.
Work cycle:
The tubes to be boxed are automatically fed through a dedicated automatic tube feeder. There is a sensor in the conveyor that verifies the presence of the tube and activates the picking of the cases from the case loader. The case is opened by a series of suction cups and inserted into the case. In this way, each blister in the product chain corresponds to a case in the carton transport chain.
If an illustrative brochure is required in the case, the sensor that activates the case gripper also sends an impulse to the brochure magazine. The brochure is picked up by suction cups and inserted into a series of tapes. Via these belts, the brochure is transported to a gripper that is located below the product feed chain.
All the elements that make up the packaging advance to the introduction station, where a series of pushers introduce them into the crate. During the insertion movement the tube encounters the brochure and inserts it into the case.
Once the insertion is complete, the case advances to the closing area where, with a series of flap stretching and folding operations, the packaging cycle is completed.