The CAM G60 automatic wrapping machine is a new concept machine, designed to carry out the packaging and complete packaging of parallelepiped-shaped products, at very high speed, using heat-sealable plastic film and, on request, Kraft paper. Maintains wide flexibility of use, ensuring high performance and reliability.
The fully automatic work cycle requires the operator only to change the reel of winding material. This is faster thanks to the quick film replacement device.
The second spool shaft is supplied as standard with the machine.
Prepared for an easy and quick format change, this machine is extremely versatile.
All the adjustment devices have been arranged on the operator side, while the structural elements, which limit the accessibility to the handling of the product, have been eliminated.
The base of the machine allows the complete separation of the product handling area from the mechanical drive mechanism.
- all controls are obtained by positive mechanical movements.
- the stopping and starting of the feed conveyor are controlled by the incoming product.
- the speed is continuously regulated by a selector on the control panel.
- The wrapping of the wrapping material is carried out by means of a mechanical gripper which works over the entire width of the film.
- The stacking of products is achieved mechanically by counting the number of layers.
It can be installed in any packaging line and can be connected to any upstream machine with a simple closure.
This machine is equipped with a "Picomat" PLC and display to identify the causes of the machine stopping or the opening of the protections.
Speed ​​per minute: max 60 cycles.
Absorbed power: max 3,5 KW