Speed: up to 7500-9000 pieces per hour
Vial diameter from 8 to 18 mm
Voltage 220 Volt
Frequency 50 Hz
Stages 1

The product to be inspected coming from the feed is picked up by a conveyor belt. It is then transported by a slowly rotating conveyor belt in front of the operator. Defective bottles are manually rejected by the operator, those found to be acceptable at the inspection continue the movement towards the discharge.

The ATM18 is an inspection machine for particle and cosmetic inspection of pre-filled vials and bottles containing liquid products (clear oil and suspensions). Usually connected to a de-nester and re-nester unit, the ATM18 is configured to be installed in a fully automated line. From the basic version to the most complex machine configuration, the ATM18 can present all technological options for liquid products.